Borrmaskiner tillbehör

Quick chuck with 1/4" attachment for drill/screwdriver with bit attachment.

Quick chuck 1-10 mm.

Metal quick chuck with SDS-plus attachment for hammer drills. Enables the use of drills, countersinks, etc.

Quick chuck with clamping force safety and plastic ring. Percussion resistant. FastFix bracket. Fits all Festool screwdrivers, drill drivers (except DR 20/DRP 20), impact drill screwdrivers and impact drills with Centrotec connection.

Drill chuck with 1/4" attachment for drill/screwdriver with bit attachment.

Tool-free quick chuck for drills, drill drivers and impact drills.

Impact drill resistant quick chuck with built-in spring tension lock and double dust cover. The tools sit securely even under very heavy loads. Oil-resistant and durable rubber bellows that protect the threads and the clamping surface against dirt. Quick tool change without a chuck key. Impact drill resistant design. Intended for right-hand drive machines only.

Quick chuck specially developed for impact drills. Stable design with metal sleeve. 2 sleeves with radial lock for safe attachment of the tools. Quick tool change without a chuck key. Impact drill resistant design. Hole with locking screw. With hexagon bracket that simplifies assembly and disassembly. Suitable for both right- and left-hand drive machines.

Quick chuck specially developed for handheld and stationary drills. As the pressure increases on the drill bit, the quick chuck automatically tightens even more. Can be easily opened by hand, even after a heavy load. Too much load. Quick tool change without a chuck key. Intended for right-hand drive machines only. Not impact drill resistant.

Quick tensioning and self-locking. Three-backed. With ball bearings. The jaws hardened and ground. With conical mounting hole according to DIN 238 or with threaded mounting hole.
The S models have smaller outer dimensions.

Safety chuck with clamping force lock, especially for impact drills. Three-backed. The jaws hardened and ground. With conical mounting hole according to DIN 238 or with threaded mounting hole.

System Jakob. Three-backed. The jaws hardened and ground. The keyholes hardened. With conical mounting hole according to DIN 238 or with threaded mounting hole. Key included.
* = With threaded fastening hole drilled through for screw securing during left rotation.

Key chuck with 3/4" Weldon attachment. Fits Fein magnetic drill KBU 110-4 M, KBU 35 MQW, KBU 35 QW, KBU 35-2 QW, AKBU 35 PMQW Select, KBE 65-2 M, KBE 50-2 M, KBE 50-2 and KBE 35.

For three-back drill chucks acc. system Jacob. Dimensions according to DIN 6349/4 and more. Ring gear and key according to DIN 6349/4.

Passar alla maskiner med SDS-plus fäste. Gängning för samtliga chuckar med 1/2"x20 UNF.

SDS-plus adapter for drill chucks with thread 1/2" x 20 UNF.

Adapter for mounting a Centrotec tool chuck or FastFix drill chuck in a machine with an SDS-plus attachment.

Drill chuck adapter for Milwaukee quick fix Fixtec to external thread 1/2"x20 UNF. Fits Milwaukee drills PLH 16 QEX, V 28 HX, V 18 HX, PLH 26 QEX, PH 30 Power X, KH 26 XE, KH 24 XE, KH 28 Super XE, BH 26 LXE and PH 26 X.

Eccentric attachment for screwing close to the edge. 1/4" connection bracket for bits. Fits all Festool C and T screwdrivers with FastFix system (except CXS and TXS).

Angle attachment for screwing and drilling in tight spaces. Fits all Festool C and T screwdrivers with FastFix system (except CXS and TXS). Integrated 1/4" bit holder in the connection bracket.

Angle attachment for screwing and drilling in tight spaces. FastFix bracket. 43 mm clamping neck diameter. Integrated 1/4" bit holder in the connection bracket. Fits Festool drill driver DRC 18/4, DR 18/4 E and impact drill driver PDC 18/4, PD 20/4 E.

Angle attachment for drilling, threading and screwdriving in tight spaces. Fits all Fein QuickIN accessories such as drill chuck, bit holder or sleeve adapter. Equipped with 1/4" internal bit holder. Compatible with all Fein cordless drill drivers with QuickIN/QuickIN MAX interface.

Accessory set in 3 parts. Fits Fein cordless drill driver with QuickIN/QuickIN MAX interface.
Contents:
1 bit holder with quick chuck (1/4")
1 socket adapter with 1/2" square holder.
1 threaded stud adapter with 2 clamping sleeves for threaded studs with shank diameter 4.5 and 6 mm.

Depth stop for precise screwing with even screwing depth. Fits all Festool C and T screwdrivers with FastFix system (except CXS and TXS).

Depth stop for precise screwing with even screwing depth. FastFix bracket. Integrated claw coupling to keep the set screw depth exactly. Can be used with both socket wrenches for hexagon screws and screw bits thanks to replaceable stop socket. Leaves no marks on the surface thanks to the protective rubber ring on the stop sleeves. Supplied with stop sockets Ø 17 mm and Ø 23 mm, bit PH 2 and socket wrench with spanner width 8 mm.
Fits Festool drill driver DRC 18/4, DR 18/4 E, impact drill driver PDC 18/4, PD 20/4 E and all C and T screwdrivers.

Bit chuck for Festool bits with Centrotec attachment. Fits all Festool screwdrivers and drill drivers (except DR 20 and DRP 20) with FastFix connection.

Socket adapter with 3/8" square bracket. FastFix bracket. Fits Festool drill driver DRC 18/4, DR 18/4 E, impact drill driver PDC 18/4, PD 20/4 E and all C and T screwdrivers.

Flexible shaft for finishing wood, plastic, iron and non-ferrous metal. For use with a drill.
Chuck span: 1-6 mm.

Dust collector for collecting dust when drilling above head height. Suitable for drill Ø 5-8 mm.

Dust extraction adapter for dust-free vacuuming of boreholes up to 15 mm. Suitable for vacuum cleaners and coarse vacuum cleaners for wet and dry. Connection diameter 35 mm.

Accessories for core drill Fein with QuickIn attachment and Weldon attachment.

Holder with mother's wife. With QuickIN attachment for Fein core drill. Drill with Fein core drill with QuickIN attachment in bench and column drilling machines as well as other core drilling units with Morse cone.

Collet for threaded studs. Used together with socket chuck, pendulum chuck and tap adapter. Fits Fein ASCM 18 QSW Select, ASCM 18 QM Select, ASCM 12 Q Select, ABS 18 Q Select, ASB 18 Q Select, GWP 10, AGWP 10 Select and KBH 25-2 U.

Socket chuck with clamping sockets for threaded studs with shank diameter 3.5, 4.5 and 6.0 mm. Fits Fein threading machine AGWP 10 Select and GWP 10.

Accessories for Carat diamond drills/stands.
Includes:Spindle, wing nut and washer.

Accessory set in 109 parts. With drill for wood, metal and brick and bits for most common screws. Supplied in a plastic storage bag.
Contents:
Metal drill bit: 1.5, 2.0, 2.5, 3.0, 3.2, 3.5, 4.0 , 4.5, 4.8, 5.0, 5.5, 6.0, 6.5 mm
Brick drill: 3.0, 5.5, 6.0, 8.0, 10 mm
Wood Drill: 3.0, 3.2, 3.5, 4.0, 4.5, 4.8, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5 , 8.0 mm
Bits for Phillips slots: PH0x3, PH1x3, PH2x3, PH3x3
Bits for Pozidrive slots: PZ0x3, PZ1x3, PZ2x4, PZ3x4
Bits for slot screws: SL4x2, SL5x2, SL6x2, SL7x2
Square Slot Bits: S1x1, S2x1, S3x1
Torx Slot Bits: TX10x1, TX15x1, TX20x1, TX25x1, TX27x1, TX30x1
Socket Bits: H4x2, H5x2, H6x2, H7x1
BR>Long Bits for Phillips Slots: PH1x1, PH2x2, PH3x1
Long Bits for Pozidrive Slots: PZ1x1, PZ2x1, PZ3x1
Long Bits for Slotted Screws: SL6-8x1, SL8-10x1, SL10-12x1
Socket bits: 5x2, 6x1, 7x1, 8x1, 9x1, 10x1, 11x1, 12x1, 13x1
Counters
Plastic cover
Bit holder

Comprehensive accessory set in 94 parts, flexibly equipped for all screw and assembly work. Fits all Festool screwdrivers with Centrotec. Supplied in Systainer³ Organizer SYS3 with transparent lid.
Contents:
Insert box 50 x 50 x 68 mm, 15 pcs.
Centrotec magnet bit holder BH 60 CE-Imp.
Centrotec bits 100 mm: TX 10, TX 15, TX 20, TX 25, TX 30, TX 40, PZ 1, PZ 2, PZ 3, PH 1, PH 2, PH 3.
Centrotec bits 25 mm, each 5 pcs: TX 10, TX 15, TX 20, TX 25, TX 30, TX 40, PZ 1, PZ 2, PZ 3, PH 1, PH 2, PH 3.
Centrotec drill bits: 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm.

Comprehensive accessory set in 104 parts in Systainer³ Organizer SYS3 ORG M 89, equipped for all drilling, screwing and assembly work. Fits all Festool screwdrivers with FastFix system.
Contents:
Wood twist drill D 3 CE/W, D 4 CE/W, D 5 CE/W, D 6 CE/W, D 8 CE/W, D 10 CE/W.
Centrotec magnetic bit holder BH 60 CE-Imp.
Centrotec extra long magnetic bit holder BV 150 CE.
Sink QLS D2-8 CE, QLS D5-15 CE.
Drill with depth stop BTA HW D5 CE.
Drill countersink with depth stop BSTA HS D3,5 CE.
Centering drill ZB HS D5 EURO CE.
Wall hook holder HD D18 CE.
Bit assortment twinBOX BB-Mix .
Drill cassette BKS D3-8 CE/W-K.
Centrotec bits 100 mm PZ1, PZ2, PZ3, PH1, PH2, PH3, TX15, TX20, TX25, TX30, SZ0 8x5.5, SZ1 2x6.5.
Centrotec bits 25 mm, 5 each: PZ1, PZ2, PZ3, PH1, PH2, PH3, TX10, TX15, TX20, TX25, TX30, TX40.
Centrotec quick-change bit holder BHS 60 CE.
Screwdriver SD -CE-DRIVE-UNI.
Centrotec tool chuck.

Magnetic bit and drill holders for attachment to, for example, drill screwdrivers for quick access. Strong magnets ensure that the bit sits securely even on taps and impact drills. There is room for 5 bits, drills, sockets or holders. BitMag is screwed directly to the machine in one of the two holes intended for the hanging hook. Four mounting screws included, suitable for Milwaukee / Festool / DeWalt / Bosch / Makita and Hitachi. BitMag can also be attached with double-sided tape.