Borr- och fräsmaskiner

The drill head can be raised and lowered and turned 0-45° in both directions and the desired angle can be set against a graduated washer. Gears made of steel or woven laminate, which provides quiet operation. Shafts of hardened steel. Coupling devices are hardened. The drill spindle is made of steel and can be mounted with ball and roller bearings. The roller bearing is placed around the spindle cone, which provides a stable setting of the tool. The spindle is balanced with a strong spring. For attachment of fresh chuck, the drill spindle is equipped with a threaded spindle nose. During milling work, the spindle sleeve is locked in the desired position. Drill depth stop for spindle feed is easily adjusted with the locking lever against the scale on the front panel. The machine is equipped as standard with a coordinate table with 3 T-slots and an oil strip. The table can be equipped with automatic length feeding. The column is made of steel, which means better rigidity for the machine as well as better precision and minimal deviations from the fixed angle between drill and table. In the lower part of the stand there is room for installing coolant equipment. Tool ejector is built-in and facilitates tool changes. Equipped with emergency stop, undervoltage release and motor protection.
1905-8817: Tool kit MK 3. Machine vise 120 mm. jaws, 2 x T-slot nuts, Chuck 1-13mm B16, Mandrel MK3. Reduction sleeve MK3/MK2. Reduction sleeve MK3/MK1.

Combined drilling and milling machine. Suitable for repair, maintenance and training purposes as drilling and milling can be carried out in the same tension. The drill head can be raised and lowered and rotatable 0-45° in both directions and the desired angle can be set against a graduated scale. Table, column and drill head are mounted on a heavy welded stand. With gear drive and a gear box with beveled gears made of steel and fiber material that provides a quiet machine with a minimum of maintenance. Quick and easy selection of the speed. The drill spindle is equipped with a threaded spindle nose with a locking nut for attaching the chuck. On the front of the drill head there is a dial for lowering the drill spindle when fine feeding.
A 2508 U Supplied with coordinate table, 2-speed motor and motor protection with zero voltage release - protection class IP 41.
A 4008 U (M) The drill head runs on a column with a dovetail guide and can be raised and lowered with the help of an electric motor. supplied complete with 1-speed motor, motor protection with zero voltage release and emergency stop - protection class IP 41 and coordinate table.
A 4008 UMEquipped with feed gearbox which is equipped with overload protection which comes into effect in case of excessive drilling pressure. Supplied complete with 2-speed motor - protection class IP 41, motor protection with zero voltage release and emergency stop. The machines are available with a variety of accessories, such as coolant device, lighting and various reversals.